Category 6A 10G UTP Patch Panels

Patching Systems -

Category 6A 10G UTP Patch Panels


 
Category 6A Patch Panels are designed to meet 10 Gigabit Ethernet IEEE 802.3an rev. 1.0 transmission requirements and are guar-anteed to exceed ANSI/TIA-568-C.2 performance specifications. These high-density panels are available in 24- and 48-port versions featuring a rolled edge steel construction, which provides maximum strength and durability and eliminates panel flex during termina-tion. Panels feature port labeling areas and port numbering for easy circuit identification.

Panels are supplied preloaded with 10G connectors supporting both T568A and T568B wiring using an easy-to-read color-code wiring label and can be terminated using standard single-position 110 termination tool. This new connector design provides enhanced plug-to-jack connection integrity, protects against damage caused by insertion of 4- or 6-position plugs and is rated for a minimum of 750 plug insertions providing for the highest level of system reliability.

Jacks feature the ability to mount either color-coded icons for service identification or dust covers to protect unused jacks from dust and other contaminants. Rear 110 contacts provide improved conductor retention and ease of termination. Jacks are supplied with a metallized plastic cable protection cap, which eliminates alien crosstalk for maximum performance.

Panels are provided with a newly designed cable management bar(s) that easily mounts to the back of the panel without the need for mounting screws. This cable management bar features improved cable routing and strain relief.

  • Connector transmission performance meets or exceeds TIA-568-B.2-10 channel level performance specifications.
  • Connector contact design provides enhanced plug to jack connection integrity and protects against damage caused by insertion of 4 or
    6 position plugs.
  • Rear cable management bar.
  • Rear termination is made quick and easy using a 110-type connector compatible with an industry standard single position 110 or Krone termination tool.
  • Connectors are rated for at least 750 plug insertions providing for the highest level of system reliability.
  • Maximum strength and durability construction.
  • TRANSMISSION PERFORMANCE

ANSI/TIA-568-B.2-10: Meets or exceeds category 6A (1-500 MHz) channel specifications

  • TRANSMISSION MEDIA

Unscreened twisted pair (UTP)

  • WIRING SCHEME

ANSI/TIA/EIA-568-B.2: T568A & T568B
ISO/IEC 11801 2nd Ed.: 8-position pin/pair assignment (1-2/3-6/4-5/7-8)

  • ELECTRICAL

Insulation resistance: min 500 MOhm @ 100 Vdc
Dielectric withstanding voltage: 1,000 Vdc/ac peak contact to contact @ 60 Hz for 1 min
Spring wire contact resistance: max 20 Mohm
IDC contact resistance: max 2.5 MOhm
Current rating: see figure

  • MECHANICAL

Total contact force: min 800 g for 8 wire leads with FCC compliant 8p8c plug
Retention: 50 N (11 lbf) for 60±5 s
Mating cycle life: min 750 cycles with FCC compliant 8p8c plug

  • CONSTRUCTION

Panel: steel/Ni plated steel
Cable management bar: steel/Ni plated steel
Jack housing: high impact thermoplastic, UL94V-0 fire retardant
Jack contacts: phosphor bronze alloy plated with min 50 ?in of gold over 70-100 ?in of nickel plating
Jack IDC: 110 type, phosphor bronze alloy with 100 ?in 100% tin alloy

  • JACK TYPE

8p8c (8-position, 8-contact) "RJ45" type

  • WIRE GAUGE

22-24 AWG (0.644 - 0.511 mm)

  • MOUNTING DIMENSIONS

Panel: 19" rack mountable
1.5 in deep (w/o cable management bar)
6.0 in deep (with cable management bar installed)
1.75 in (1 RMU) high (24458-C6A)
3.50 in (2 RMU) high (48458-C6A)
Jacks: W 16.9 mm D 31.3 mm H 19.3 mm
W 0.67 in D 1.23 in H 0.76 in

  • ENVIRONMENTAL CONDITIONS

Storage: -40°C - +70°C (-40°F - +158°F)
Operation: -10°C - +60°C (+14°F - +140°F)
RH (operation): max non-condensing 93%

  • COMPLIANCE

ANSI/TIA/EIA-568-B.2-10, IEEE 802.3 ab, FCC Part 68 Subpart F, UL 94V-0, UL 1863, IEC 60603-7

  • APPLICATIONS

X.21, V.11, S0, ISDN, CSMA/CD 10BASE-T, 100BASE-TX, 100BASE-T4, 100BASE-T2, 1000BASE-T, 10GBASE-T, TR 4/16/100,
100BASE-VG, ATM LAN 25/51/155, TP-PMD

  • WARRANTY

5-year limited component warranty
10-year Signamax Link/Channel Warranty
15-year Signamax Extended Component Warranty
25-year Signamax Cabling System Warranty

© Copyright 2016 by Aksh Optifibre | Terms of Use | Privacy Statement

We smarten up your life.. TM