Category 6A Screened Patch Panels are designed to meet 10 Gigabit Ethernet IEEE 802.3an rev. 1.0 transmission requirements and are guaranteed to exceed ANSI/TIA-568-C.2 performance specifications. These high-density panels are available in 24- and 48-port versions featuring port labeling areas and port numbering for easy circuit identification.
Panels are supplied with 10G screened connectors supporting both T568A and T568B wiring using an easy-to-read color-code wiring label. This uniquely designed connector features a tool-less termination method for quick and easy installation. A new contact design provides enhanced plug-to-jack connection integrity and is rated for a minimum of 750 plug insertions providing for the highest level of system reliability. Jacks are fully shielded to optimize protection from EMI including alien crosstalk.
Panels are provided with a newly designed cable management bar that easily mounts to the back of the panel without the need for mounting screws. This cable management bar features improved cable routing and strain relief.
ANSI/TIA-568-B.2-10: Meets or exceeds category 6A (1-500 MHz) channel specifications
Unscreened or screened twisted pair (UTP/ScTP/FTP/SFTP)
ANSI/TIA/EIA-568-B.2: T568A & T568B
ISO/IEC 11801 2nd Ed.: 8-position pin/pair assignment (1-2/3-6/4-5/7-8)
Insulation resistance: min 500 MOhm @ 100 Vdc
Dielectric withstanding voltage: 1,000 Vdc/ac peak contact to contact @ 60 Hz for 1 min
Spring wire contact resistance: max 20 Mohm
IDC contact resistance: max 2.5 MOhm
Current rating: see figure
Total contact force: min 800 g for 8 wire leads with FCC compliant 8p8c plug
Retention: 50 N (11 lbf) for 60±5 s
Mating cycle life: min 750 cycles with FCC compliant 8p8c plug
Panel: steel/Ni plated steel
Cable management bar: steel/Ni plated steel
Jack housing: screened case: copper, 0.25 mm (0.0098 in), 100 ?in nickel plated
contact holder: high impact thermoplastic, UL94V-0 fire retardant
Jack contacts: phosphor bronze alloy plated with min 50 ?in of gold over 70-100 ?in of nickel plating
Jack IDC: 110 type, phosphor bronze alloy with 100 ?in 100% tin alloy
8p8c (8-position, 8-contact) "RJ45" type
22-24 AWG (0.644 - 0.511 mm)
Panel: 19" rack mountable
1.5 in deep (w/o cable management bar)
6.0 in deep (with cable management bar installed)
1.75 in (1 RMU) high (24458S-C6A)
3.50 in (2 RMU) high (48458S-C6A)
Jacks: W 17.0 mm D 41.8 mm H 19.3 mm
W 0.67 in D 1.65 in H 0.76 in
Storage: -40°C - +70°C (-40°F - +158°F)
Operation: -10°C - +60°C (+14°F - +140°F)
RH (operation): max non-condensing 93%
ANSI/TIA/EIA-568-B.2-10, IEEE 802.3 ab, FCC Part 68 Subpart F, UL 94V-0, UL 1863, IEC 60603-7
X.21, V.11, S0, ISDN, CSMA/CD 10BASE-T, 100BASE-TX, 100BASE-T4, 100BASE-T2, 1000BASE-T, 10GBASE-T, TR 4/16/100,
100BASE-VG, ATM LAN 25/51/155, TP-PMD
5-year limited component warranty
10-year Signamax Link/Channel Warranty
15-year Signamax Extended Component Warranty
25-year Signamax Cabling System Warranty
