Category 6 UTP Angled Patch Panel

Patching Systems -

Category 6 UTP Angled Patch Panel


 

Category 6 Angled Patch Panels are designed to the same high level performance as our standard category 6 panels. Angled panels are supplied preloaded with black category 6 jacks or can be ordered unloaded for field configuration. These panels have the added feature of an angled design to help route patch cords to vertical rack or cabinet mounted cable management. This feature eliminates the need for horizontal cable management panels, which provides additional rack space in high density applications.

  • Transmission performance exceeds TIA/EIA-568-C.2 component, permanent link and channel level performance specifications
  • Contact design provides enhanced plug-to-jack connection integrity and protects against damage caused by insertion of 4- or 6-position plugs
  • Connectors are rated for at least 750 plug insertions providing for the highest level of system reliability
  • Rear termination is made quick and easy using a standard single-position 110 termination tool
  • Optional rear cable management bar
  • Maximum strength and durability construction
  • TRANSMISSION PERFORMANCE

ANSI/TIA/EIA-568-C.2: exceeds category 6 (1-250 MHz) specifications
ISO/IEC 11801 2nd Ed.: exceeds category 6 (1-250 MHz) specifications

  • TRANSMISSION MEDIA

Unscreened twisted pair (UTP)

  • WIRING SCHEME

ANSI/TIA/EIA-568-C.2: T568A & T568B
ISO/IEC 11801 2nd Ed.: 8-position pin/pair assignment (1-2/3-6/4-5/7-8)

  • ELECTRICAL

Insulation resistance: min 500 MOhm @ 100 Vdc
Dielectric withstanding voltage: 1,000 Vdc/ac peak contact to contact @ 60 Hz for 1 min
Spring wire contact resistance: max 20 MOhm
IDC contact resistance: max 2.5 MOhm
Current rating: see figure

  • MECHANICAL

Total contact force: min 800 g for 8 wire leads with FCC compliant 8p8c plug
Retention: 50 N (11 lbf) for 605 s
Mating cycle life: min 750 cycles with FCC compliant 8p8c plug

  • CONSTRUCTION

Panel: steel/high-impact black epoxy-powder anticorrosive paint
Jack housing: high impact thermoplastic, UL94V-0 fire retardant
Jack contacts: phosphor bronze alloy plated with min 50 ?in of gold over 70-100 ?in of nickel plating
Jack IDC: 110 type, phosphor bronze alloy with 100-?in 100% tin alloy

  • JACK TYPE

8p8 (8-position, 8-contact) "RJ45" type

  • WIRE GAUGE

22-24 AWG (0.644-0.511 mm)

  • MOUNTING DIMENSIONS

Panel:
19" rack-mountable
114 mm (4.5 in) deep
44.45 mm (1.75 in) (1 RMU) high (24-port)
88.90 mm (3.50 in) (2 RMU) high (48-port)

Jacks:
W 16.9 mm D 31.3 mm H 19.3 mm
W 0.67 in D 1.23 in H 0.76 in

  • ENVIRONMENTAL CONDITIONS

Storage: -40 C-+70 C (-40 F-+158 F)
Operation: -10 C-+60 C (+14 F-+140 F)
RH (operation): max non-condensing 93 %

  • COMPLIANCE

ANSI/TIA/EIA-568-B.2-10, IEEE 802.3 ab, FCC Part 68 Subpart F, UL 94V-0, UL 1863, IEC 60603-7

  • APPLICATIONS

X.21, V.11, S0, ISDN, CSMA/CD 10BASE-T, 100BASE-TX, 100BASE-T4, 100BASE-T2, 1000BASE-T, 10GBASE-T (up to 55 m),
TR 4/16/100, 100BASE-VG, ATM LAN 25/51/155, TP-PMD

  • WARRANTY

5-year limited component warranty
10-year Signamax Link/Channel Warranty
15-year Signamax Extended Component Warranty
25-year Signamax Cabling System Warranty

© Copyright 2016 by Aksh Optifibre | Terms of Use | Privacy Statement

We smarten up your life.. TM