Category 5e UTP Pre-Terminated Trunk Cable Assemblies

Patch Cords, Cable & Cable Assemblies -

Category 5e UTP Pre-Terminated Trunk Cable Assemblies


 

Pre-terminated Category 5e Trunk Assemblies help to reduce significantly both time and cost of a cabling installation. Terminated and tested in a controlled manufacturing environment, cut to the customer pre-ordered lengths, and ready to install in a patch panel, trunk assemblies eliminate all these operations in the field making your job easy and efficient. Trunk cable assemblies can be provided in an unscreened (U/UTP) and screened (F/UTP) versions in a jack-to-jack, jack-to-plug, or jack-to-blunt cut configurations to support the widest range of applications. Cables can be used with any Signamax field-configurable patch panel (screened trunk cables cannot be used with 48U-HDMMP-1R).

  • Ready-to-use product - cable bundles are ready for installation and require no additional termination operations except the one-ended designs
  • Solid cable and keystone jacks used in the assembly meet and exceed category 5e specifications
  • Pre-tested at the factory per ANSI/TIA-568-C.1 requirements
  • All cable legs are labeled at both ends for easy identification and aligning in the field
  • Each cable bundle is enclosed in a CMR- or CMP-rated mesh sleeve that retains the bundle and protects it during installation
  • Mesh sleeve is fixed by heat-shrink tubing that can be used as an anchor point when cable pulling is needed
  • Compatible with all Signamax field-configurable patch panels (screened trunk cables cannot be used with 48U-HDMMP-1R)
  • TRANSMISSION PERFORMANCE

ANSI/TIA-568-C.2: meets or exceeds category 5e (1-100 MHz) permanent link specifications
NOTE: All cable trunks require field testing after installation

  • TRANSMISSION MEDIA

Unscreened 100-Ohm twisted pair (U/UTP)
Screened 100-Ohm twisted pair (F/UTP)

  • JACK TYPE

8p8c (8-position, 8-contact) "RJ45" style, keystone design

  • WIRING SCHEME

ANSI/TIA-568-C.2: T568B

  • WIRE GAUGE

24 AWG, solid copper

  • ELECTRICAL - JACK

Insulation resistance: min 500 MOhm @ 100 Vdc
Dielectric withstanding voltage: 1,000 Vdc/ac peak contact-to-contact @ 60 Hz for 1 min
Spring wire contact resistance: max 20 mOhm
IDC contact resistance: max 2.5 mOhm

  • ELECTRICAL - CABLE

Spark test: 2,000 250 Vac
Dielectric strength: 2,500 Vdc / 3 seconds
Insulation resistance: min 150 MOhm/km (46 MOhm/kft)
Conductor resistance: max 9.38 Ohm / 100 m (328 ft) @ 20 C (68 F)
Resistance unbalance: max 2 %
Capacitance unbalance: max 160 pF / 100 m (328 ft)
Mutual capacitance: max 5,600 pF / 100 m (328 ft)

  • ELECTRICAL - PLUG

Insulation resistance: min 500 MOhm @ 100 Vdc
Dielectric withstanding voltage: 1,000 Vdc/ac peak contact-to-contact @ 60 Hz for 1 min
Contact resistance: max 20 mOhm
Current rating: see figure

  • CONSTRUCTION - JACK

Housing:
unscreened: high-impact thermoplastic, UL94V-0 fire-retardant
screened: zinc-alloy fully shielded, grounding post for 2.5 x 0.5-mm (0.110 x 0.020-in) female disconnect

Jack spring wire: phosphor bronze alloy plated with 50 ?in of gold over 70-100 ?in of nickel

IDC: 110 type, phosphor bronze alloy with 100-?in 100% tin (Sn) alloy

  • MOUNTING DIMENSIONS - JACK

unscreened: D 30.00 mm H 19.30 mm W 16.90 mm (D 1.181 in H 0.760 in W 0.665 in)
screened: D 42.40 mm H 25.80 mm W 16.90 mm (D 1.669 in H 1.016 in W 0.665 in)

  • CONSTRUCTION - U/UTP CABLE

CONDUCTOR:
Material: bare copper
Size: 24 AWG
Construction: 1/0.508 0.02 mm (1/0.0200 0.001 in)

INSULATION:
Material: CMR- or CMP-rated thermoplastic
Thickness: max average: 0.201 mm (0.0079 in), min at any point: 0.141 mm (0.0056 in)
Diameter: 0.91 0.06 mm (0.036 0.002 in)
Color coding:
blue/white-blue
orange/white-orange
green/white-green
brown/white-brown
Elongation: min 300 %
Tensile strength: min 1.682 kg/mm2 (0.0058 psi)

SHEATH:
Material: CMR- or CMP-rated thermoplastic
Diameter: 5.2 0.3 mm (0.21 0.01 in)
Color: see ORDERING INFORMATION
Elongation: min 100 %
Tensile strength: min 1.407 kg/mm2 (0.005 psi)
Thickness: average: 0.50 mm (0.020 in), min at any point: 0.45 mm (0.018 in)
Aging: at 100C for 168 hrs - min elongation retention: 50 %, min tensile strength retention: 75 %

  • CONSTRUCTION - F/UTP CABLE

CONDUCTOR:
Material: bare copper
Size: 24 AWG
Construction: 1/0.515 0.02 mm (1/0.0203 0.001 in)

INSULATION:
Material: CMR- or CMP-rated thermoplastic
Diameter: 1.03 0.02 mm (0.041 0.001 in)
Color coding:
blue/white-blue
orange/white-orange
green/white-green
brown/white-brown
Elongation min 300 %
Tensile strength: min 1.682 kg/mm2 (0.0058 psi)

SHEATH:
Material: CMR- or CMP-rated thermoplastic
Diameter: 6.3 0.3 mm (0.25 0.01 in)
Color: see ORDERING INFORMATION
Elongation: min 100 %
Tensile strength: min 1.407 kg/mm2 (0.005 psi)

SCREEN:
PET tape: 0.025 mm (0.0010 in) thickness
Aluminum/PET tape: 0.050 mm (0.0020 in) thickness
Tinned copper drain wire: 0.46 mm (0.018 in) diameter

  • CONSTRUCTION - PLUG

Assembly: FCC Part 68 Subpart F
Housing: UL listed 94V-0 flame retardant polycarbonate
IDC blades: phosphor bronze, min 50 ?in of gold plating over 100 ?in of nickel in contact area

  • MECHANICAL - JACK

Total contact force: min 800 g for 8 wire leads
Retention force: 50 N (11 lbf) for 60 5 s
Mating cycle life: min 750 cycles

  • MECHANICAL - CABLE

Tensile strength: > 400 N (90 lbf)
Minimum bend radius: 25 mm (1 in)

  • MECHANICAL - PLUG

Retention: 50 N (11 lbf) for 605 s
Mating cycle life: min 750 cycles
Tensile strength: ? 20 N per wire

  • ENVIRONMENTAL CONDITIONS

Storage: -40 C - +70 C (-40 F - +158 F)
Operation: -10 C - +60 C (+14 F - +140 F)
RH (operation): max non-condensing 93 %

  • COMPLIANCE

ANSI/TIA-568-C.2, IEC 60603-7, IEC 61156-6, IEC 60332-1-2, FCC Part 68 Subpart F, UL 94V-0, UL 444, UL 1666

  • APPLICATIONS

X.21, V.11, S0, ISDN, CSMA/CD 10BASE-T, 100BASE-TX, 100BASE-T4, 100BASE-T2, 1000BASE-T, TR 4/16/100, 100BASE-VG, ATM LAN 25/51/155, TP-PMD

  • WARRANTY

5-year limited component warranty
10-year Signamax Link/Channel Warranty
15-year Signamax Extended Component Warranty
25-year Signamax Cabling System Warranty

© Copyright 2016 by Aksh Optifibre | Terms of Use | Privacy Statement

We smarten up your life.. TM