ategory 6A 10G Angled Patch Panels are designed to the same high level performance as our standard category 6A panel panels. Angled panels are supplied preloaded with black category 6A jacks or can be ordered unloaded for field configuration. These panels have the added feature of an angled design to help route patch cords to vertical rack or cabinet mounted cable management. This feature eliminates the need for horizontal cable management panels, which provides additional rack space in high density applica-tions.
Connector transmission performance meets or exceeds TIA-568-B.2-10 performance specifications
Connector contact design provides enhanced plug to jack connection integrity and protects against damage caused by
insertion of 4 or 6 position plugs
Angled design eliminates the need for cable management panels providing additional rack space
Rear termination is made quick and easy using a 110 type connector compatible with an industry standard single
position 110 or Krone termination tool
Connectors are rated for at least 750 plug insertions providing for the highest level of system reliability
Maximum strength and durability construction
TRANSMISSION PERFORMANCE
ANSI/TIA-568-B.2-10: Meets or exceeds category 6A (1-500 MHz) specifications
Insulation resistance: min 500 MOhm @ 100 Vdc
Dielectric withstanding voltage: 1,000 Vdc/ac peak contact to contact @ 60 Hz for 1 min
Spring wire contact resistance: max 20 Mohm
IDC contact resistance: max 2.5 MOhm
Current rating: see figure
MECHANICAL
Total contact force: min 800 g for 8 wire leads with FCC compliant 8p8c plug
Retention: 50 N (11 lbf) for 60±5 s
Mating cycle life: min 750 cycles with FCC compliant 8p8c plug
CONSTRUCTION
Panel: steel/high-impact black epoxy-powder anticorrosive paint
Jack housing: high impact thermoplastic, UL94V-0 fire retardant
Jack contacts: phosphor bronze alloy plated with min 50 μin of gold over 70-100 μin of nickel plating
Jack IDC: 110 type, phosphor bronze alloy with 100 μin 100% tin alloy
JACK TYPE
8p8c (8-position, 8-contact) "RJ45" type
WIRE GAUGE
22-24 AWG (0.644 - 0.511 mm)
MOUNTING DIMENSIONS
Panel: 19" rack-mountable
114 mm (4.5 in) deep
44.45 mm (1.75 in) (1 RMU) high (24458A-C6A)
88.90 mm (3.50 in) (2 RMU) high (48458A-C6A)
Jacks: W 16.9 mm D 31.3 mm H 19.3 mm
W 0.67 in D 1.23 in H 0.76 in
ENVIRONMENTAL CONDITIONS
Storage: -40 °C - +70 °C (-40 °F - +158 °F)
Operation: -10 °C - +60 °C (+14 °F - +140 °F)
RH (operation): max non-condensing 93 %
COMPLIANCE
ANSI/TIA/EIA-568-B.2-10, IEEE 802.3 ab, FCC Part 68 Subpart F, UL 94V-0, UL 1863, IEC 60603-7