Category 6A 10G UTP Patch Cords

Patch Cords, Cable & Cable Assemblies -

Category 6A 10G UTP Patch Cords


 

Signamax Connectivity Systems category 6A patch cords are designed to meet 10 Gigabit Ethernet IEEE 802.3an rev. 1.0 transmis-sion requirements, and are guaranteed to meet ANSI/TIA-568-C.2 channel performance. Cords are 100% transmission tested and support category 6A 100-meter channel performance. Assembled in a controlled environment using advanced manufacturing tech-niques to insure consistent quality these patch cords provide reliable performance when mated with our category 6A connecting hardware and deliver supreme performance for network cabling systems.

Signamax category 6A patch cords incorporate slim-profile snag-free boots, which protect the plug latch, and a flexible, but durable cable strain relief and are compatible with both T568A and T568B wiring schemes. Patch cords are manufactured using ETL-verified 26-AWG stranded cable designed for greater flexibility and service life.

  • Designed to meet 10G IEEE 802.3an transmission requirements
  • Guaranteed to meet TIA-568-C.2 performance
  • 100% factory transmission tested per TIA-568-C.2 specifications
  • Support category 6A 100-meter channel performance
  • Rated for at least 750 plug insertions
  • T568A/B wiring scheme compatible
  • Contact design provides enhanced plug-to-jack connection integrity
  • Slim-profile snag-free boots with durable flexible cable strain relief
  • ETL verified 26 AWG stranded cable
  • Available in six colors
  • TRANSMISSION PERFORMANCE

ANSI/TIA-568-C.2: category 6A (1-500 MHz) specifications

  • TRANSMISSION MEDIA

4-pair stranded unscreened twisted pair (UTP)

  • WIRING SCHEME

ANSI/TIA/EIA-568-C.2: T568A & T568B
ISO/IEC 11801: 8-position conductor/pair assignment (1-2/3-6/4-5/7-8)

  • CORDAGE

Jacket diameter: < 6.35 mm (0.25 in)
Construction: 4 pairs, 7 strands 26 AWG, UTP,
high density polyethylene insulation,
fire retardant PVC compound jacket

  • PLUG

Assembly: FCC Part 68 Subpart F
Housing: UL listed 94V-0 flame retardant polycarbonate
IDC blades: phosphor bronze, min 50 ?in of gold plating over 100 ?in of nickel in contact area

  • MECHANICAL

Retention: 50 N (11 lbf) for 60±5 s
Mating cycle life: min 750 cycles
Tensile strength: ? 20 N per wire

  • ELECTRICAL

Insulation resistance: min 500 MOhm @ 100 Vdc
Dielectric withstanding voltage: 1,000 Vdc/ac peak contact to contact @ 60 Hz for 1 min
Contact resistance: max 20 MOhm

  • ENVIRONMENTAL CONDITIONS

Storage: -40 °C-+70 °C (-40 °F-+158 °F)
Operation: -10 °C-+60 °C (+14 °F-+140 °F)
RH (operation): max non-condensing 93 %

  • COMPLIANCE

ANSI/TIA/EIA-568-B.2-10, IEEE 802.3 ab, FCC Part 68 Subpart F, UL94V-0

  • APPLICATIONS

X.21, V.11, S0, ISDN, TR 4/16/100, 100BASE-VG, ATM LAN 25/51/155, TP-PMD, CSMA/CD 10BASE-T, 100BASE-TX, 100BASE-T4, 100BASE-T2, 1000BASE-T, 10GBASE-T

  • WARRANTY

5-year limited component warranty
10-year Signamax Link/Channel Warranty
15-year Signamax Extended Component Warranty
25-year Signamax Cabling System Warranty100BASE-T2, 1000BASE-T, 10GBASE-T

© Copyright 2016 by Aksh Optifibre | Terms of Use | Privacy Statement

We smarten up your life.. TM