Category 5e High-Density Keystone Jacks exceed component, permanent link and channel transmission requirements as defined in ANSI/TIA-568-C.2 providing a sound platform for supporting network operating systems including Gigabit Ethernet. The high-density jack is slim profile and ideal for use with our high-density field-configurable patch panels.
Category 5e jacks can be terminated with industry standard 110 single-position tools and feature color-coding for both T568A and T568B wiring schemes. Jacks feature the ability to mount either color-coded icon tabs for service identification or dust covers to pro-tect unused jacks from dust and other contaminants. Jacks are available in nine colors and are supplied with color-matched icon tabs and dust covers for voice or data identification.
Multi-purpose high-density keystone design
Contact design provides enhanced plug-to-jack connection integrity and protects against damage caused by insertion of 4- or 6-position plugs
Rear 110-type contacts provide improved wire retention and ease of termination
Rated for at least 750 plug insertions
T568A and T568B wiring with an easy-to-read color-code wiring label
Termination with standard single-position 110 termination tool
Ability to mount either color-coded icon tabs for service identification or dust covers
Supplied with three color-matched icon tabs and dust covers
Transparent protection cap protects conductor termination points and controls cable entry
Insulation resistance: min 500 MOhm @ 100 Vdc
Dielectric withstanding voltage: 1,000 Vdc/ac peak contact to contact @ 60 Hz for 1 min
Spring wire contact resistance: max 20 Mohm
IDC contact resistance: max 2.5 MOhm
MECHANICAL
Total contact force: min 800 g for 8 wire leads with FCC compliant 8p8c plug
Retention: 50 N (11 lbf) for 60±5 s
Mating cycle life: min 750 cycles with FCC compliant 8p8c plug
CONSTRUCTION
Housing: high impact thermoplastic, UL94V-0 fire retardant
Jack spring wire: phosphor bronze alloy plated with 50 ?in of gold over 70-100 ?in of nickel
IDC: 110 type, phosphor bronze alloy with 100 ?in 100% tin alloy
JACK TYPE
8p8c (8-position, 8-contact) "RJ45" type
WIRE GAUGE
22-26 AWG (0.643-0.404 mm)
FOOTPRINT
Standard keystone footprint
MOUNTING DIMENSIONS
W 16.20 mm D 32.70 mm
W 1.287 in D 0.638 in
ENVIRONMENTAL CONDITIONS
Storage: -40 °C-+70°C (-40 °F-+158 °F)
Operation: -10 °C-+60 °C (+14°F-+140 °F)
RH (operation): max non-condensing 93 %
COMPLIANCE
ANSI/TIA/EIA-568-C.2, ISO/IEC 11801 2nd Ed.,
CENELEC EN 50173, FCC Part 68 Subpart F,
UL 1863, IEC 60603-7